Stackable Storage/Assortment Boxes Optimised for 3D Print

Stackable Storage/Assortment Boxes Optimised for 3D Print

These are storage boxes, perfectly optimised for 3D print on Prusa printers. They have the following features:

Optimal square raster 60x60mm.
Perfectly stackable.
Stabilising side profiles for perfect results with PLA and PETG.
Ribs to prevent bulging if you store heavy parts.
Grid rails to securely hold them in place inside of a drawer or case.
Optimised for FFF: The boxes will print perfectly and are very stable with minimal material use.
Dual label system. You can place a label on the inside and outside, so it is always visible from all angles.
Three heights: Flat, regular and tall which can be stacked flush at the rim.
There are lids for the storage boxes, which can also be used as trays.
Part numbers: Easily find the right file to print more pieces of a box.

Print instructions

The storage boxes can be printed using a 0.4, 0.6 and 0.8mm nozzle. For the best results:

0.4mm nozzle.
0.2mm layer height
Quality or speed profile.
Use Prusament PLA.

See the prepared .3mf files as a good starting point for the printer settings.

All storage boxes are printed with the flat bottom on the print bed.
The grids are printed with the flat bottom on the print bed.
The lids are printed with the flat bottom on the print bed.

Credits:

LuckyResistor

Rate this 3D model

Leave a Reply

Your email address will not be published.