A tiny micro-sd card case.
Holds 12 micro-sd cards.
51mm (diameter) × 9.5mm (thickness).
Print with ABS/PLA, with layer height less than 0.2mm. Layer height above 0.3mm will be too coarse for the screw part.
Also, remember to flip the cap upside-down in your printing software 🙂
Print Settings
Printer: Some random printer
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 30%
Filament: – PLA/ABS white/transparent
Credits:
husixu