3D printed case for Keebio Iris Rev.4 PCB
Assumable these using 14mm M3 bolts and nuts (bolts longer than 14mm will stick out and two pieces won’t snap together)
Ultra-thin profile, the middle layer is 6.8mm thick and two-piece can be snapped together and held by magnets for easy carry
Added external buttons for easy firmware flashing
I printed the middle layer using translucent filament to get better lighting
Fusion360 file is included for anyone wants to modify themselves
You will need:
3D printed parts
14mm M3 bolts and nuts (Has to be 14mm. Or you have to use spacers if longer than 14.
Shorter won’t work)
12mm by 2mm magnets
10mm by 3mm rubber feet (3/8″ by 1/8″)
super glue
(optional some needle file)
Printed on Prusa i3 MK3,
layer height 0.15mm
Use supports
Assembly video:
video2:
Link to git:
https://github.com/Dreammaker54/3D-printed-case-for-Keebio-Iris-Rev4
Credits:
Dreammaker54
Download 3D models
| File | File size |
|---|---|
Ultra+thin+cases+for+Keebio+Iris+rev.4+keyboard,+magnetic+foldable
|
11 MB |