Keep your credit cards and cash organized in style with Hobbs Bros.’s Wall3t!
The Wall3t is a fully 3D printed wallet, requiring no metal fasteners or glue to assemble. You will need a small amount (8-12 inches) of 1.75mm filament to fasten the pieces together.
Features of the Wall3t include:
Space for up to six credit cards
A lever arm design to stagger your cards, enabling you to see them all at once (see picture)
Space for cash, receipts, or coins
Snap-fit joints to keep the wallet closed in your pocket
I have also included files for a left-handed wallet if you so desire.
Print Settings
Printer: Lotmaxx SC-10 Shark
Supports: No
Resolution: 0.20 mm / 200 microns
Infill: 20%
Filament brand: Hatchbox
Filament material: PLA
Notes:
Print all parts flat on the bed without supports. Ensure that the cover pieces print with the outside up for a cleaner finish.
Insert 1.75mm filament into each of the six holes and cut them flush on both sides. Make sure not to fasten the cover down to the base or you won’t be able to open your wallet!
Additional Files
JPG files available in Wall3t.jpg.zip.
STEP files of both Righties and Lefties versions appear in Wall3t.step.zip.
Credits:
Hobbs_Bros
Download 3D models
| File | File size |
|---|---|
Wall3t+-+Fully+3D+Printable+Wallet+(Holds+up+to+6+credit+cards)
|
2 MB |