A phone holder modeled with WWG1WGA, Punisher Logo, Eagle, and Title-4 Flag.
“Where We Go One, We Go All”
NCSWIC
Print Settings
Printer: HyperCube Evolution
Rafts: No
Supports: No
Resolution: .2 mm
Infill: 20%
Filament brand: 3D Solutech
Filament color: Silver Metal
Filament material: PLA
Notes:
The hinge and latch are designed to print reliably at first layer .3mm and a layer height of .2mm.
Other print resolutions will work, but check them in the slicer that clearances aren’t affected.
Since this is printed flat it is a large print. (203.7mm Length x 50mm Width)
Post-Printing
After printing the designed-in supports need to be removed:
At each hinge there are 5 small supports.
Two phone cradle supports.
Friction latch supports.
These supports are internal and hold the latch in place during printing.
Fold the base to the center.
Using a small object like a screwdriver gently press the latch down until the click of the front supports breaking away is heard.
To break away the rear supports press the latch in.
the latch should now be free to move.
Credits:
ArtieH
Download 3D models
| File | File size |
|---|---|
WWG1WGA+Phone+Stand
|
1 MB |