After delivering Tofu all day for the family business, Store your keys in style on this Toyota AE86 Trueno Pop-Up Key Hook
I’m not gonna sugarcoat it, designing this was way out of my comfort-zone and it took a lot out of me, I hope you like it though!
Notes
Prints in multiple pieces and snap fits.
Swappable License Plates with Optional Maker Supply Magnets (D4x2mm Round Magnets)
The Rear Mounting Plate holds it all together with either some Blu-Tack or a few drops of Glue.
Mounts to the wall with Adhesive Tape
The License Plate is customizable inside Bambu Studio / Orca Slicer so these make great customizable gifts. (see below)
There is no spring inside, so if the lights don’t self-close, just pop them down when you grab your keys. There is also an optional magnet hole (D4x2mm Round) in the mounting plate and back of the hook to help, You could also use more Blue-tack!
0.2 and 0.4 Nozzle files for the License Plate are provided
Assembly is simple:
1. Rotate the object using the Green Handle
2. Ensure it is rotated 180 degrees to be facing upright
3. Click Objects on the Left, Find the Blank NP Group and ensure text_shape is selected
4. with the text selected, click the Text Shape button at the Top Right.
Change your text and ensure that
Thickness is set to 0.00
Angle is set to 0.00
Embedded depth is set to 1.00
5. Flip the whole thing back over by 180 degrees using the green handle again. Do Not Use Auto Orient
6. Hit Slice and double check the text is coming up properly. Enjoy your custom Number Plate!
Credits:
jaayjeee
Download 3D models
| File | File size |
|---|---|
Trueno+Key+Hook+Final_stls
|
2 MB |
lights shows like raw file not obj so canoot open in any program such as fusion or blender also
you can open by adding .stl on the file’s name, I did this and worked fine