Required Printed Parts:
Back.stl (1x)
Floor.stl (1x)
Front.stl (1x)
MainPillar.stl (1x)
RoofLeft.stl (1x)
RoofRight.stl (1x)
Side.stl (2x)
SidePillarLeft.stl (1x)
SidePillarRight.stl (1x)
Optional Printed Parts:
AlignmentPinASymmetrical.stl (4x)
AlignmentPinSymmetrical.stl (3x)
Required non-printed parts:
cone head screw M3*10 (12x)
hex head screw M3*20 (6x)
Recommended Materials: ABS or PETG (10% infill)
Remark:
I used metal alignment pins and super glue to attach the roof to the pillars
Credits:
Projunk