As always, many thanks to the original poster, JustAddFilament, for this great model!
This is a very simple remix:
First, I’ve separated all the parts from the “card” into individuals parts. This allowed me to print parts with different resolutions. I’ve print all the parts at 0,20 with the exception of the two “body sides”, printed at 0,10 and all the head parts and the snowspeeder at 0,05.
Second, while assembling the model, I had a hard time removing the support material in the “top part” of the feet to make room for the connectors. I ended up gluing the two feet parts together. So, I’ve decided to join the two foot parts together. Note that with this new part, you will need four less “leg connector” compare to the original design. (12 instead of 16).
Print Settings
Printer brand: Prusa
Printer: I3 MK3S
Rafts: No
Supports: Yes
Resolution: 0.20, 0.10, 0.05
Infill: 25%
Filament_brand: AMZ3D
Filament_color: Grey
Filament_material:PLA
Credits:
LP5095