This is a Christmas ornament that can be expanded. It can be actuated by pressing on the top and bottom or by spining the top to keep it open.
Print Settings
Printer brand: TEVO
Printer: Tornado
Rafts: No
Supports: No
Resolution: .2
Infill: 15
Notes:
To print it you will need to print 12 of the Shell parts and 1 of each of the others. Only the Bolt Cap will need supports. You will also need a 1/4-20 x 1 3/4 bolt and some rubber bands.
I like to chase the threads of the Stem – Threaded part with a 1/4-20 tap to make the bolt move a little bit easier but it is not necessary. It can be a bit tricky to assemble and it definately can help if you have someone help hold the peices in place while the rubber band is put on.
Credits:
Siebs