A small dice tower with dice tray included.
Both parts print without supports and use about 70 grams of filament.
HIGH ROLLS GUARANTEED*
*not really, but my friends and I had some good luck while using those during our last Call of Cthulhu session 🙂
Size comparison
When closed, the whole dice tower is about UNO cards stack sized
Storage
The tower can fit a whole set of standard dice for storage. Put on the tray to keep them inside
Features
The bumps on the tray and indents on the tower allow you to lock the tray to the tower in two positions. To close it after use and to lock it in place when using so the tower doesn’t slide on the tray
Ribs on the steps of the tower to make sure that your rolls will be thorough and random
Multicolor
For printers without multicolor printing, you can apply color change for a few layers to make the logo and bottom of the tray a different color (at 0.2 layer height It’s for layers 3-7).
Different versions
You can choose between a blank, Call of Cthulhu or Dungeons and Dragons versions.
Custom Section
Make your own version by cutting any logo or text on the blank tower and tray in your slicer.
Recommended depth:
Tower – 0.25mm
Tray – 0.4mm
Credits:
Ocelotzlasu
Download 3D models
| File | File size |
|---|---|
Micro Dice Tower (Blank, DnD, CoC)
|
12 MB |