Shishiro Botan’s mascot as a model you can print. I suggest using a resin printer over a FFF printer due to the tail’s thickness.
Edit 4/6/22: Version 2.0
The tale is thicker thicker
Adjusted the angle for the fuse to reduce the amount of necessary supports
Eyes are attached to the body much better and have been enlarged/extended to print better
Edit 4/28/22: Version 3.0
adjusted the tail thickness again
a supported version is available for anyone with resin printers or wish to not deal with manually adding supports
supported version downsized to 50mm height to fit resin printer buildplates
Credits:
ShirayukiX