Go Pro Hero 3 fig rig. Handy for fast panning shots, or as a underwater camera holder.
Uses 4x M8x50 cap head bolts and nylon nuts.
I used a heat gun to settle any tolerances when assembling.
let me know if you like it. thanks!
I want to see your MAKES!
bottomslotselfstanding.STL included as a alternative bottom bar for those who want it to stand upright on a flat surface.
for those wanting to make a new slot to hold a different item such as a phone… in the slot.
the depth is 6mm, the width is 40mm at the bottom 30mm at the top. angle is 50.45 deg. reduce all by a mm to have a fighting chance.
Remember to wind in the nuts in and out of the nyloc nut first and use some lubricant on the the bolt.
Credits:
Thumber