This was a rough design to use as a tree topper and has room for improvement, but will likely modify into a lamp design in the future. Solidworks files included if anyone wants to modify.
Printed in several parts, Back plate, Diffuser (White PLA), front face of body, eyes, and optional zip tie brackets that can be glued to the back for attaching to the tree.
12V LED strip installed in the tracks of the backing plate, then diffuser is screwed on using the guide holes.
If printer accuracy is good enough, the back and front should press fit together without the need for adhesive.
The eyes have a tiny lip on the inside so they can be glued in at the right depth.
Credits:
Enginuic
Download 3D models
| File | File size |
|---|---|
Tree+Topper
|
1 MB |