Switch stand
This is a two-part compact switch stand which is made in Autodesk Fusion 360.
The model should be ready for printing as soon as the model is downloaded.
Settings:
Infill, 20%.
Layer height, 0.15mm.
With Support.
With Build Plate Adhesion.
Further comments
I am aware that the switch does not fully fit into to slots of the stands. However, this is because I personally don’t want my switch to rub up against the plastic every time I put it into and out of the components as I am afraid this will scratch the glass after prolonged use. However, feel free to customize this design as you like, this is just my personal preferen
Post-Printing
Stand, alone (comma does a lot in just those two words)
Standards
NGSS
Overview and Background
I originally came up with this idea when I had to go on a field trip with my class and we would like to play MP games on the switch, however, we quickly found out it definitely was not ideal to play the switch on the train as it was shaking too much. After the field trip, I sat down and came up with this simple design which can be taken with you anywhere and works well for a lot of places.
Lesson Plan and Activity
This design is definitely a good beginner introduction into using fusion 360, also you get something useful out of it as well.
Materials Needed
3D printer
PLA plastic
Fusion 360
Credits:
Andyjoensen