This phone-stand differs from others to hold your smartphone making it easier to manipulate and reposition it.
Phone dimensions must be 67mm x 6.9mm
Print Settings
Printer brand: Creality
Printer: Ender 3 Pro
Rafts: No
Supports: Yes
Resolution: 0.16
Infill: 25%
Filament_brand: Sunlu
Filament_color: Grey
Filament_material: PLA & PLA+
Notes:
Print files “Piede.STL” and “Attacco Iphone.STL” WITH HOLES PERPENDICULAR TO PRINT PLANE. File “Base.STL” could be printed on the flat surface on the plane. My suggestions for good stiffness and surface quality. height 0.16mm width 0.4mm wall layer 4 Top/Bottom layers 4 speed 50mm/s retraction 5mm If you arrange the 3 pieces a bit far away between them the strings will be easier to remove. Printing time: about 3 hours
Post-Printing
Use a paper clip to create the joints.
Credits:
dsEdo