This is a Lego hand perfectly designed to hold a Sharpie pen.
You can choose between a magnetic one and one which can slot onto a screw head.
Printing Your Lego Hand
Layer Height: 0.1mm
Infill: 15 – 30%
Support: Yes for the hand, no for the cuffs (See below)
Print the hand part upside down (With the flatter side of the hand on the print bed, and use support material for the wrist and cross shaped mount parts).
The cuffs can both be printed with the X part facing up and without support material. There are overhangs inside but they have been designed to bridge easily and you shouldn’t have any issues with these without support material.
Building Your Lego Hand
The Lego hand prints in 2 pieces. A hand, and the Cuff. There are two versions of the cuff piece, one for use with magnets and one for use with screws.
The hand part has a cross extrusion at the back which slots into a cross recess on the front of the cuff.
Credits:
ByteSlinger
Download 3D models
| File | File size |
|---|---|
sharpie-lego-hand-holder-model_files
|
2 MB |