Tea Light Haunted House

Tea Light Haunted House 3d model

This haunted house opens up to allow the addition of an LED tea light candle

Print Settings & Assembly
The roof requires a very small amount of supports.

AMS/MMU Version
House Facade is a 3MF with 2 separate parts. For it to work properly, the windows need to be changed to white or transparent. Once printed, the facade needs to be glued to the case. There is geometry present to aid in alignment. After gluing is complete, just add your light inside and place the roof on top.

Non-AMS/MMU Version
The windows need to be printed separately. Once printed, the windows need to be glued to the back of the facade. Then the facade needs to be glued to the case. There is geometry present to aid in alignment. After gluing is complete, just add your light inside and place the roof on top.

Designed with Fusion360

The filaments used in the pictures above:
Bambu Lab Matte Charcoal PLA
GIANTARM Transparent PLA

Credits:

JamesThePrinter

Rate this 3D model

Download 3D models

File File size
zip tea-light-haunted-house-model_files 3 MB

Leave a Reply

Your email address will not be published. Required fields are marked *