Scarbo SVF1 Model has functioning doors, suspension, steering, shifting and moving engine pistons. Based on a modern replica of 1967 Ferrari 312 Formula One.
No supports, except for the exhaust pipes. Everything is designed to be simply snapped together, no need for gluing or drilling. Alternative parts for Prusa mini are also availible. More info in the manual in the download section.
Print settings
Material: PLA (PETG only for the base frame, for easier snaping)
Infil: 100% (Only parts I used 15% were the wheels)
Perimeters: 4 (There are a lot of rods, pins and generally longer parts, where more perimeters could save some print time)
Layer height: 0,2mm
Supports: Only for the exhaust pipes
Brim: There are custom ones for a few risky parts, so unless you have major problems with adhesion, you shouldn’t use any.
Estimated print time: 38 hours
Used filament: Grey – 205g (69m), Black – 135g (46m), Red – 54g (18m). 394g in total according to Prusa slicer.
Credits:
Ouky1991
Download 3D models
| File | File size |
|---|---|
scarbo-svf1-race-car-model-other_files
|
66 MB |
|
scarbo-svf1-race-car-model-model_files
|
57 MB |