A case to hold RPi Zero, PiCamera (in my case NoIR version) and the Pimoroni HyperPixel display.
Cut a small square of the “superblue” filter that comes with the NoIR camera and dropped to the hole that holds the camera in place.
The Micro-HDMI -> HDMI adapter provider friction-fit to hold stuff in place when lid is not there.
v2 lid has thinner top (the part that covers the non-viewable area of the display), I did not test-print that, just figured after printing the first one that it might be a good idea.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
Doesn’t Matter
Supports:
Yes
Resolution:
0.2
Infill:
15%
Notes:
Fast settings Printed on NGen but anything should work, If you have super-well tuned printer maybe the bridges don’t need supports.
How I Designed This
Looked up the footprint for RPi zero to get accurate hole positions without messing about too much.
Rest is just measured things with calipers and then modeled a simple case in Fusion 360 (Download design files from https://a360.co/2HnaCGS).
Credits:
mashiara